Ensure that your device is connected to the Wavlink repeater either wirelessly or through an Ethernet cable. Launch any search engine and insert the IP address "192.168.10.1" in the search box. Press Enter to access the repeater's configuration page. Password and username must be entered by default. Check the user manual or the label on the repeater for the default credentials. Once logged in, you will see the repeater's control panel. Follow the on-screen instructions to set up the repeater based on your network requirements. You may need to select your existing wireless network and enter its password. After making the necessary configuration changes, click on the "Save" or "Apply" button to save the settings and apply them to the repeater. Once the repeater restarts, check if the network is extended by connecting your devices to the extended WiFi network. By following these steps, you should be able to successfully do the 192.168.10.1 WiFi repeater setup easily.